Replacement Parts

Replacement Parts

Air Jets

Air Jet (1/8″ or 3/16″) with Flange

US Automation - Air Jet (1/8″ or 3/16″) with Flange
Choose Option A, B, or C

Air Jet (3/16″) with Standoff (A, B, or C)

US Automation - Air Jet (3/16″) with Standoff
Choose Option A, B, or C

Air Jet (1/8″) with Standoff (A, B, or C)

US Automation - Air Jet (1/8″) with Standoff
Choose Option A, B, or C

Air Jet Mounting Clamp

US Automation - Air Jet Mounting Clamp

Drive Unit Coils

Drive Coil Unit – V101

US Automation - Drive Coil Unit - V101
Length: 4.3 Inches
Width: 3.8 Inches
Height: 3.0 Inches
Voltage: 115Vac
Fits 15”, 18”, 21”, 24”, 30” Drive Units

Drive Coil Unit – V103

US Automation - Drive Coil Unit - V103
Length: 4.3 Inches
Width: 2.6 Inches
Height: 3.0 Inches
Voltage: 115Vac
Fits: 12” Drive Unit and Standard Storage Hoppers

Inline Coil

US Automation - Inline Coil

Feed Bowl Controllers

FC-40+ Vibratory Feeder Bowl Controller

US Automation - FC-40+ Vibratory Feeder Bowl Controller
The FC-40 Plus Feeder Cube is a single controller, housed in a Nema-1 general purpose enclosure. Input voltage is 120VAC, 50/60 Hz. Fused for 15 amps.

FC-90+ Vibratory Feeder Bowl Controller

US Automation - FC-90+ Vibratory Feeder Bowl Controller
Rodix FC-90 Plus Series Controls are used to operate vibratory bowls with part sensing, and storage hoppers fitted with electronic bowl level detectors. The 12VDC power supply and sensor time delays are provided by the control. The demand cycling of the bowl or hopper is controlled by the sensor’s output signal processed through the time delay settings inside the FC-90.

FC-112+ Vibratory Feeder Bowl Controller

US Automation - FC-112+ Vibratory Feeder Bowl Controller
The FC-112 Plus Feeder Cube is a triple controller with two 90 Plus Series parts sensing units and one 40 Plus Series unit in a Nema-1 general purpose enclosure. Input voltage is 120VAC, 50/60 Hz. Unit A is fused for 10 amps, Unit B for 15 amps and Unit C for 5 amps.

 

US Automation, LLC
7143 State Road 3
Huntertown, IN 46748

Phone: 260.338.1100
Fax: 260.338.1101

ISO9001:2008

5 + 11 =